Barry's 103 Build

Malossi cases + Malossi 70cc kit + Doppler crankshaft + Malossi 4 petal carbon fiber reed block + 21mm PHBG + MVT internal rotor CDI + Polini variator + Polini spring +  Simonini Circuit pipe + Domino controls.
It's a Scorpio.

103 metrakit kit port match to teknix case

Continued from 103 polini seizure. I'mma hack this kit to this case.

See the marks from where the old kit transfers were?

1 wurd: blowtorch.

See them little flecks of metal?

That's one there.

And another.

Masking tape to keep metal out of the seal.

yuk.

oh yeah lookit that sludge.

Ok here we go:

Gettin' there.

Oh yeah she oughta breathe good now.

 What a nice ignition.

 
Ever give a motor a blowjob? Fun explaining that one on the invoice....

 
Time to go back on the bike.

Fired right up. Tuning notes as follows:

Teknix cases matched to 64cc metrakit polini head carbon fiber Malossi 4 petal reed block & intake, Dellorto PHBG pilot: 40 main: 100 W7 needle leanest notch simonini circuit two ball vari stock 12v  NOS peugeot points sys pulls hard chickened out speedo read past 120 km/h, so that's at least 60, right? zowie....pipe seems pretty decent - not too peaky.

103 Polini Seizure

103 polini 65cc phbg simonini pipe treats china cdi

What's that hiding in there?

 It broke the clutch pad!

Ah, one of those guys sheared off or got sucked into the clutch at high revs...

 Coil marks on the high spots of that magnet material.

Seize marks.

 Scored.

 Man those ports are cray cray.

 Ouch.

 Detonated.


CUZ IT AIN'T CASE MATCHED!!!!1!

Reed block is fine. Is that enough permatex?

 Motor sure does look cool.